崔燕勇
Tsui, Yeng-Yung・工學院・機械工程系所
碩士平均畢業時長
2.34 年
中位數 2.10 年・21 人
博士平均畢業時長
5.47 年
中位數 5.47 年・1 人
收錄論文
22 篇
100–108 學年度
全校中位數(供對照)
碩士 2.10・博士 6.11 年
畢業時長趨勢
每學年度畢業人數
只計入有論文收錄的畢業生;中途休學或更換指導教授的學生不會出現在這裡。
研究關鍵字
SHIRCI數值模擬電液動力學Numerical simulation兩相流電暈風Corona windelectrostatic actuation資料中心Data Center離子風靜電致振ElectrohydrodynamicIonic wind振動式風扇Electrohydrodynamic (EHD)熱回流發熱量分布Heat load distribution天花板供風流體體積法VOFTwo-phase flow流固耦合電暈風增強散熱EHDCorona wind enhance heat transfer天花板供風系統CFD流場均勻度風管設計Over Head Air DistributionCFD SimulationAirflow uniformityAlternative Ceiling Ducts design靜電致動Piezoelectric fanR-134a酯類冷凍潤滑油池沸騰平滑管冷凍油黏度Polyol Ester lubricantpool boilingsmooth tubeviscosity冷通道封閉型式RecirculationDifferent Cold Aisle Containment
想看最新的研究方向與計畫經費,也可以查政府研究計畫(GRB)。
指導論文
| 學年度 | 論文 | 學制 | 入學 | 提交日期 | 畢業時長 |
|---|---|---|---|---|---|
| 108 | Numerical Simulation of Heat Transfer Enhancement by Combining Corona Wind and Electrostatic Vibration 機械工程系所・共同指導:王啟川 電液動力學、離子風、電暈風、靜電致振、電暈風增強散熱、Electrohydrodynamic、EHD、Ionic wind、Corona wind、electrostatic actuation、Corona wind enhance heat transfer | 碩士 | 106 | 2020-01-20 | 2.47 年 |
| 108 | Numerical Simulation and Analysis of Small-Scale Data Center 機械工程系所・共同指導:王啟川 資料中心、天花板供風系統、CFD、流場均勻度、風管設計、SHI、RCI、Data Center、Over Head Air Distribution、CFD Simulation、Airflow uniformity、Alternative Ceiling Ducts design | 碩士 | 105 | 2020-01-20 | 3.47 年 |
| 108 | Electrode Design and Heat Transfer Analysis of Hybrid Corona Wind Cooling System 機械工程系所・共同指導:王啟川 電液動力學、電暈風、靜電致動、振動式風扇、Electrohydrodynamic (EHD)、Corona wind、Electrostatic actuation、Piezoelectric fan | 碩士 | 105 | 2019-09-23 | 3.14 年 |
| 107 | The study of pool boiling characteristics for R-134a and lubricant oil mixture 機械工程系所・共同指導:王啟川 R-134a、酯類冷凍潤滑油、池沸騰、平滑管、冷凍油黏度、Polyol Ester lubricant、pool boiling、smooth tube、viscosity | 碩士 | 105 | 2019-08-19 | 3.05 年 |
| 107 | Experimental Study of Flow Resistance Effects on Thermal Management for Small-Scale Data Center 機械工程系所・共同指導:王啟川 資料中心、熱回流、冷通道封閉型式、發熱量分布、RCI、SHI、Data center、Recirculation、Different Cold Aisle Containment、Heat load distribution | 碩士 | 105 | 2018-10-17 | 2.21 年 |
| 106 | Experimental Analysis and Numerical Simulation of a Novel Heat Transfer Enhancement Method Combining Corona Wind and Electrostatic Vibration 機械工程系所・共同指導:王啟川 電液動力學、電暈風、靜電致振、振動式風扇、Electrohydrodynamic (EHD)、Corona wind、Electrostatic actuation、Vibration fan | 碩士 | 104 | 2018-03-01 | 2.58 年 |
| 106 | Using PIV Technique to Investigate the Jet Flow under the Effect of a Sidewal 機械工程系所・共同指導:王啓川 圓形噴流、矩形噴流、側壁、粒子圖像測速法、流場可視化、Round Jet、Rectangular Jet、Sidewall、Flow Visualization、Particle Image Velocimetry | 碩士 | 104 | 2018-02-05 | 2.52 年 |
| 106 | Analysis and Numerical Modeling of Hot Air Recirculation in Data Center 機械工程系所・共同指導:王啟川 天花板供風、RCI、SHI、overhead supply system | 碩士 | 104 | 2017-09-21 | 2.14 年 |
| 105 | Experimental Analysis of Supply Flow Rate and Heat Load in Thermal Management for a Container Data Center 機械工程系所・共同指導:王啟川 發熱量分布、RCI、SHI、熱回流、Heat load distribution、Re-circulation | 碩士 | 104 | 2017-08-08 | 2.02 年 |
| 105 | Numerical modelling of Heat Transfer Enhancement By Coupled Corona Wind and Electrostatic Force-Induced Vibration 機械工程系所・共同指導:王啟川 離子風、靜電力、熱傳增強、Ionic wind、Electrostatic Force、Heat Transfer Enhancement | 碩士 | 103 | 2016-08-26 | 2.07 年 |
| 104 | Experimental Analysis of Thermal Management for Small-Scale Data Center 機械工程系所・共同指導:王啟川 天花板供風、RCI、SHI、冷通道完全封閉、Supplied airflow on the ceiling、Full containment of the cold aisle | 碩士 | 102 | 2016-08-02 | 3.00 年 |
| 104 | Numerical Modelling of Electrohydrodynamic Flows Induced by Corona Discharge 機械工程系所・共同指導:王啟川 電液動力學、電暈放電、散熱、數值模擬、Electrohydrodynamic、Corona discharge、Cooling、Numerical simulation | 碩士 | 102 | 2015-09-07 | 2.10 年 |
| 104 | A VOF-Based Interface Tracking Method Coupled with Level Set Method for Two Phase Flows 機械工程系所 兩相流、流體體積法、等位函數法、表面張力、數值模擬、two phase flow、VOF、Level-set、surface tension、Numerical Simulation | 碩士 | 102 | 2015-09-07 | 2.10 年 |
| 103 | Numerical Modeling of the Thermal Flow in Small-scale Data Center. 機械工程系所・共同指導:王啟川 貨櫃型資料中心、中小型資料中心、資料中心、抽屜式機櫃、數值模擬、Container data center、Small-scale data center、data center、drawer type rack、Numerical modeling | 碩士 | 102 | 2015-09-07 | 2.10 年 |
| 102 | VOF-Based Algorithms and Their Applications for Two-Phase Flows (Including Heat and Mass Transfers) 機械工程系所 流體體積法、雙流體流場、兩相流、薄膜沸騰、相變化、數值模擬、Volume of fluid (VOF)、Two-fluid flow、Two-phase flow、Film boiling、Phase change、Numerical simulation | 博士 | 97 | 2014-01-21 | 5.47 年 |
| 101 | Numerical Analysis of the Performance of a Showerhead Type MOCVD. 機械工程系所 化學氣相沉積、MOCVD | 碩士 | 100 | 2013-08-15 | 2.04 年 |
| 101 | Using an Interface-Tracking VOF Method for calculation of heat transfer in Two-Phase Flow 機械工程系所 兩相流、界面熱傳、Two-Phase Flow、Interface | 碩士 | 100 | 2013-08-15 | 2.04 年 |
| 101 | Application of Finite Volume Method for Structure and Fluid Flow Calculations 機械工程系所 有限體積法、非線性結構體、流固耦合、Finite volume、nonlinear structure、structure and fluid flow interaction | 碩士 | 100 | 2013-08-12 | 2.03 年 |
| 101 | Development of an Implicit Finite Volume Method for Structural 機械工程系所 流固耦合、結構體、Fluid-Structure Interaction、Structural Dynamics | 碩士 | 99 | 2012-08-23 | 2.06 年 |
| 101 | Numerical Calculation of Boiling Flows Using an Interface Tracking VOF Method 機械工程系所 兩相流、薄膜、沸騰、VOF、boiling | 碩士 | 99 | 2012-08-22 | 2.06 年 |
| 101 | Numerical Analysis of the Flow in a Peristaltic Channel with Phase Shift 機械工程系所 蠕動、數值、Peristaltic、Numerical | 碩士 | 99 | 2012-08-21 | 2.06 年 |
| 100 | 3D Simulation of a Vertical-Axis Wind Turbine 機械工程系所 風力發電、垂直式風機、數值模擬、wind power、VAWT、numerical simulation | 碩士 | 99 | 2012-07-03 | 1.92 年 |