鄭裕庭
Cheng, Yu-Ting・電機學院・電子研究所
碩士平均畢業時長
2.45 年
中位數 2.24 年・61 人
在職專班平均畢業時長
7.41 年
中位數 7.41 年・2 人
博士平均畢業時長
6.79 年
中位數 6.94 年・7 人
收錄論文
73 篇
100–115 學年度
全校中位數(供對照)
碩士 2.10・在職專班 2.08・博士 6.11 年
畢業時長趨勢
每學年度畢業人數
只計入有論文收錄的畢業生;中途休學或更換指導教授的學生不會出現在這裡。
研究關鍵字
Inkjet printingInkjet printing technology噴墨列印技術軟性電子Flexible Electronics陽極氧化鋁噴墨列印MEMS分子印跡聚合物心肌旋轉蛋白T探針微機電非酵素酶電化學感測器Non-enzymatic electrochemical sensor覆晶接合Molecular Imprinted Polymer噴墨式列印技術乳酸感測探針動態流速管路temperature sensorMolecularly imprinted polymer乳酸感測器Lactate Sensor超穎材料無線傳輸metamaterial分子印跡模板Probe局部鹼性環境電極引入鹼性物質local alkaline environmentembedded alkaline materials葡萄糖矽穿孔微帶線微結構感測器微機電系統Sensors軟性印刷電路板亞甲藍非酵素微傳感軟性探針Anodic aluminum oxideTroponin TNon-enzymatic sensor微型化石墨烯Graphene植入式醫療器材Lactate
想看最新的研究方向與計畫經費,也可以查政府研究計畫(GRB)。
指導論文
| 學年度 | 論文 | 學制 | 入學 | 提交日期 | 畢業時長 |
|---|---|---|---|---|---|
| 115 | Development of a Flexible Inkjet-Printed Nickel Oxide-Based Non-Enzymatic Methanol-Sensing Electrode with a Localized Alkaline Environment 前瞻半導體研究所・共同指導:吳樸偉 噴墨列印技術、非酵素酶電化學感測器、甲醇感測器、局部鹼性環境、電極引入鹼性物質、Inkjet printing、Non-enzymatic electrochemical sensor、Methanol sensor、local alkaline environment、embedded alkaline materials | 碩士 | 113 | 2026-09-11 | 2.11 年 |
| 115 | Chip-Level Integration Technology of Polymer Microlens Arrays for Photon-Efficient SPAD Imaging and Optical Character Recognition under Photon-Limited Conditions 電子研究所 單光子雪崩二極體、微透鏡陣列、晶片級整合、覆晶接合、高光子效率成像、Single-photon avalanche diode、Microlens array、Chip-level integration、Flip-chip bonding、Photon-efficient imaging | 碩士 | 111 | 2026-07-31 | 4.00 年 |
| 114 | Evaluation of Biodegradable PLGA/Gelatin Films Modified by Glucose Using Molecularly Imprinted Polymer/Thionine-Based Electrodes 電子研究所 生物可降解材料、PLGA、明膠、葡萄糖、生物相容性、植入型醫療器材、分子印跡聚合物、Biodegradable、Gelatin、biocompatibility、Implantable medical device、Molecular Imprinted Polymer | 碩士 | 112 | 2025-11-06 | 2.27 年 |
| 114 | Development of a Electrochemical Nonenzymatic Bicarbonate Sensing Bielectrodes System via the Elimination of Hydrogen Phosphate Interference 電子研究所 噴墨列印技術、碳酸氫根感測器、磷酸感測器、非酵素酶電化學感測器、Inkjet printing technology、Bicarbonate sensor、Phosphate sensor、Non-enzymatic electrochemical sensor | 碩士 | 112 | 2025-08-26 | 2.07 年 |
| 113 | Development of Five Layers Redistribution Layer (RDL) Polymer-based Interposer Technology for Beyond 5G Communication Applications 電子研究所 有機中介層、重新佈線層、矽穿孔、噴墨式列印技術、微帶線、基板整合波導天線、Organic Interposer、Redistribution Layer(RDL)、Through-Silicon Via(TSV)、Inkjet Printing Technology、Microstrip Line、Substrate Integrated Waveguide(SIW) Antenna | 碩士 | 111 | 2025-11-18 | 3.30 年 |
| 113 | Development of Non-Enzymatic Urea Sensing Electrodes with a Localized Alkaline Environment Via Entrapped Sodium Hydroxide 電子研究所 噴墨列印技術、非酶尿素感測器、局部鹼性環境、電極引入鹼性物質、即時檢測、Inkjet printing technology、Non-enzymatic urea sensor、local alkaline environment、embedded alkaline materials、real-time monitoring | 碩士 | 112 | 2025-08-06 | 2.02 年 |
| 113 | Miniaturization of Flexible Non-Enzymatic H2S Sensing Electrode Using Negative Reduction Cleaning Bias Technology for Anti-Sulfur Poisoning 電子研究所 非酵素酶電化學感測電極、軟性硫化氫感測探針、噴墨列印技術、抗電極中毒技術、多壁碳管/奈米銀修飾、負還原偏壓清理電極技術、non-enzymatic electrochemical electrode、flexible H2S sensing probe、inkjet printing technology、anti electrode poisoning technology、multi-walled carbon tube/ silver nanoparticle modification、negative reduction bias cleaning electrode technology | 碩士 | 112 | 2025-06-27 | 1.91 年 |
| 113 | A Combining Liftoff and Printing Platform Technology for IoT, Biomedical, and Flexible Electronics Fabrication and Applications 電子研究所 噴墨印刷製程技術、微結構、軟性電子、穿透基板導通孔、感測器、微機電系統、生物醫學應用、Inkjet Printing Process Technology、Microstructures、Flexible Electronics、Through-Substrate Via、Sensors、Microelectromechanical Systems、Biomedical Applications | 博士 | 105 | 2025-01-16 | 8.46 年 |
| 113 | The Development of a Flexible Printed Circuit Board (FPCB)-based Real-Time Temperature/Lactate/pH Probe for Biomedical Sensing Applications 電子研究所 乳酸感測探針、酸鹼值感測、溫度感測器、軟性印刷電路板、噴墨列印技術、動態流速管路、lactate sensing probe、pH value sensing、temperature sensor、flexible PCB、Inkjet printing technology、dynamic flow environment | 碩士 | 111 | 2024-12-10 | 2.36 年 |
| 113 | The Study of In-situ Urea Detection using Inkjet Printed Ag/Co Nanocomposite Electrode with Localized Water Electrolysis 電子研究所 噴墨列印技術、負偏壓電解水、銀/鈷奈米複合材料、尿素感測器、非酵素酶電化學感測器、inkjet printing technology、urea sensor、negative bias water electrolysis、silver/cobalt nanocomposite、non-enzymatic electrochemical sensor | 碩士 | 111 | 2024-10-17 | 2.21 年 |
| 113 | Inkjet Printing Process Development for Fabricating Ag TSV Structures in Dry Film Photosensitive Epoxy Resin Substrates 電子研究所 垂直穿孔導線、壓膜光阻、奈米銀噴墨技術、高深寬比TSV、菊鏈結構、Through Substrate Via、Dry film photoresist、Inkjet printing technology、High aspect ratio TSV、Daisy chain structure | 碩士 | 110 | 2024-10-07 | 3.18 年 |
| 113 | The Effect of Glucose on The Reliability of Ischemia Heart Disease Diagnosis Using Molecularly Imprinted Polymer/Methylene Blue Sensing Electrodes and Associated Solutions 電子研究所 心肌旋轉蛋白 T、葡萄糖、亞甲藍、分子印跡聚合物、藍瓶反應、勞氏紫、Cardiac Troponin T、Glucose、Methylene Blue、Molecular Imprinted Polymer、Blue Bottle、Thionine | 碩士 | 111 | 2024-08-26 | 2.07 年 |
| 112 | A Study on the Application of Industrialized Substrate Fabricated Lactate Real-time Monitoring System in ECMO 電子研究所 乳酸感測探針、非酵素微傳感軟性探針、軟性印刷電路板、噴墨列印技術、動態流速管路、體外循環膜肺維生系統、連續乳酸監測、Non-enzymaticandelectrochemicalmicrosensor、FleiblePCB、Inkjetprinting technology、Etracorporealcirculationmembranelunglie-sustainingsystem、Continuouslac- tate monitoring | 碩士 | 110 | 2024-05-06 | 2.76 年 |
| 112 | Design and Fabrication of Anodic Alumina/ Methylene Blue/ Molecularly Imprinted Polymer Nanocomposite Electrode for Direct Detection of Troponin T in Urine 電子研究所 分子印跡聚合物、陽極氧化鋁、奈米複合結構、亞甲藍、心肌旋轉蛋白T、尿液檢測、非酵素感測電極、Molecularly imprinted polymer、Anodic aluminum oxide、Nanocomposite structure、Methylene-blue、Troponin T、Urine testing、Non-enzymatic sensor | 碩士 | 110 | 2023-10-30 | 2.25 年 |
| 112 | Optimizing the Design and Development of Electrodes for Miniaturized Inkjet-printed Electrochemical Biosensors 電子研究所 微型化、生物感測器、離子選擇電極、參考電極、乳酸感測器、石墨烯、噴墨列印技術、Miniaturization、Biosensor、Ion Selective Electrode (ISE)、Reference Electrode、Lactate Sensor、Graphene、Inkjet Printing Technology | 博士 | 106 | 2023-10-03 | 6.17 年 |
| 111 | A Real-time Microsensing Needle for Detecting Lactate in a Dynamic Environment 電子研究所 動態流速管路、引流管(連接尿袋與導尿管之管路)、乳酸感測探針、非酵素微傳感軟性探針、微柱狀結構、噴墨列印技術、Dynamic flow environments、Lactate microsensing needle、Non-enzymatic and electrochemical microsensor、Inkjet printing | 碩士 | 110 | 2023-07-20 | 1.97 年 |
| 111 | The Study of Receiver Coil for Wireless Implantable Neurostimulator 電子研究所 植入式醫療器材、無線傳輸系統、線圈設計、Implantable Medical Devices、wireless transmission system、coil design | 碩士 | 109 | 2023-01-01 | 2.42 年 |
| 111 | Design and Miniaturization of Flexible Metamaterials for 13.56MHz Wireless Power Transmission Enhancement of Implantable Medical Devices 電子研究所 超穎材料、無線傳輸、metamaterial、WPT、13.56MHz | 碩士 | 109 | 2022-12-05 | 2.34 年 |
| 111 | Development of Molecularly Imprinted Polymer(MIP)-based Lactate and Cardiac Troponin T Dualtemplate Sensor with Corresponding Clinical Study 電子研究所 心肌旋轉蛋白T、乳酸、分子印跡聚合物、Troponin T、Lactate、Molecularly imprinted polymer | 碩士 | 109 | 2022-11-23 | 2.31 年 |
| 111 | A Sub-THz Co-Reflecting Curved Patch - Reflector Antenna Array for Gain Enhancement and Near Field Focus Application 電子研究所・共同指導:郭建男 陣列貼片天線、反射式天線、近場聚焦、Patch antenna array、Reflector antenna、Near field focus | 碩士 | 108 | 2022-10-20 | 3.22 年 |
| 111 | Technology Development of Layered Hydrogen Sulfide Sensor and Sensor Probe 電子研究所 硫化氫電化學感測器、微型探針、噴墨式列印技術、微小支柱、Hydrogen sulfide amperometry sensors、Sensor probe、Inkjet printing technology、Micropillars | 碩士 | 109 | 2022-10-14 | 2.20 年 |
| 110 | A Sub-MW Electromagnetic Microspeaker with Bass Enhancement Using a Parylene/Graphene/Parylene Composite Membrane 電機資訊國際學程 電磁裝置、低功率電子器件、複合材料、微型揚聲器、Parylene/Graphene/Parylene、總諧波失真、Electromagnetic devices、low-power electronics、Composite materials、MEMS microspeaker、Total harmonic distortion | 博士 | 103 | 2022-08-07 | 8.02 年 |
| 110 | Design and fabrication of flexible inkjet printed hydrogen sulfide sensing electrode 電子研究所 硫化氫感測器、噴墨式列印技術、軟性基版Kapton、電化學感測器、Hydrogen sulfide sensing electrode、Inkjet printing technology、Flexible substrate、Electrochemical sensor | 碩士 | 108 | 2021-11-05 | 2.26 年 |
| 110 | The Development of Molecularly Imprinted Polymer(MIP)-based NT-proBNP Sensor and Corresponding Clinical Study 電子研究所 N端前腦利鈉肽、心臟衰竭、分子印跡模板、NT-proBNP、Heart failure、Molecularly imprinted polymer | 碩士 | 108 | 2021-11-02 | 2.26 年 |
| 110 | Design and fabrication of a low-power biomimetic MEMS magnetic field sensor 電機學院電子與光電學程 微機電磁力計、低功率、彷生、高導磁合金、軟磁、微機電翹曲匹配、MEMS magnetic field sensor、MEMS magnetometer、low-power、biomimetic、permalloy、soft-magnetic、curl-match | 碩士在職專班 | 101 | 2021-10-26 | 9.23 年 |
| 110 | Miniaturization of a 13.56 MHz Metamaterial for the Wireless Power Transmission 電子研究所 超穎材料、無線傳輸、Metamaterial、Wireless power transmission | 碩士 | 108 | 2021-08-18 | 2.05 年 |
| 109 | Piezoelectric Lithium Niobate MEMS Microphone with d22 Mode 電子研究所 微機電麥克風、壓電感測、鈮酸鋰、MEMS Microphone、Piezoelectric Sensing、Lithium Niobate | 碩士 | 107 | 2021-01-22 | 2.48 年 |
| 109 | Development of A Combined Spin Coating and Lift-off Process (CSLP) for Silver Interconnect Applications 電子研究所 旋塗剝離、銀墨水、微結構、Spin coating and lift-off、silver inks、microstructure | 碩士 | 107 | 2020-12-30 | 2.41 年 |
| 109 | The Development of pH & Lactate Sensing Probe for Ischemia Muscle Monitoring and Corresponding Animal Test 電子研究所 探針、酸鹼值、乳酸濃度、微型化、Probe、pH、Lactate、miniaturized | 碩士 | 107 | 2020-12-26 | 2.40 年 |
| 109 | Sensitivity Enhanced Molecular Imprinted Polymer(MIP) Sensor For Low Concentration Troponin T Detection Using Anodic Aluminum Oxide(AAO) Structure 電子研究所 分子印跡模板、陽極氧化鋁、心肌旋轉蛋白T、Molecular Imprinted Polymer、Anodic Aluminum Oxide、TroponinT | 碩士 | 107 | 2020-10-20 | 2.22 年 |
| 109 | Research of Applying Nafion to Inkjet Printed Non-enzymatic Lactate Sensor to Enhance Ability of Blocking Interferences and Clinical Blood Test 電子研究所 噴墨列印、非酵素型感測器、乳酸感測器、臨床血液檢測、Inkjet printing、non-enzymatic、lactate sensor、blood test | 碩士 | 107 | 2020-10-18 | 2.21 年 |
| 108 | Dual Membrane Capacitive Micromachined Ultrasonic Transducer for Airborne Distance Measurement 電子研究所 CMOS-MEMS、CMUT、超音波、空氣、轉阻放大器、ultrasound、airborne、transimpedance amplifier | 碩士 | 105 | 2020-12-30 | 4.41 年 |
| 108 | Combined Process of Silicon Shadow Masking(SSM) and Direct Cell Printing for Selective Cell Patterning 電子研究所 矽蔽蔭遮罩、細胞直噴、Silicon Shadow Mask、Direct Cell Printing | 碩士 | 106 | 2019-12-17 | 2.38 年 |
| 108 | Inkjet Printed Flexible Non-Enzymatic Lactate Sensor and Corresponding Clinical Blood Test 電子研究所 乳酸感測器、非酵素感測器、噴墨列印、臨床血液檢測、Lactate sensor、Non-enzymatic sensor、Inkjet printing、Clinical blood test | 碩士 | 106 | 2019-10-13 | 2.20 年 |
| 108 | The Development of pH & Temperature Sensing Probe and Potassium & Ammonia multi-Sensor Probe for Lower Limb Muscle Monitoring and Corresponding Animal Experiments 電子研究所 離子感測器、感測探針、multi-sensor probe、ion-selective sensor | 碩士 | 106 | 2019-08-27 | 2.07 年 |
| 108 | The development of molecularly imprinted polymer(MIP)-based cardiac troponinT sensing electrodes with corresponding clinical feasibility study 電子研究所 鄰苯二胺、心肌旋轉蛋白T、分子印跡模板、o-PD、TroponinT、MIP | 碩士 | 106 | 2019-08-18 | 2.05 年 |
| 108 | The Development of pH, Potassium ion and Temperature Micro Sensing Probe for Swine Heart Monitoring and Corresponding Animal Experiments 電子研究所 酸鹼值、鉀離子、溫度、探針、pH、potassium、temperature、probe | 碩士 | 106 | 2019-08-14 | 2.03 年 |
| 107 | The Development of 13.56 MHz Metamaterial for the Wireless Power Transmission Enhancement in Implantable Biomedical Devices 電子研究所 超穎材料、無線傳輸、植入式醫療器材、metamaterial、wireless transfer power、implantable biomedical devices | 碩士 | 105 | 2018-11-11 | 2.28 年 |
| 107 | A Combined Process of Silicon Shadow Masking and Inkjet Printing (SSMP) for Graphene Oxide and Reduced Graphene Oxide Microstructures for Selective Cell Culturing Applications 電子研究所 噴墨列印、蔽蔭遮罩、氧化石磨烯、細胞定位、視網膜色素上皮細胞、PC-12细胞、Inkjet printing、Shadow mask、Graphene Oxide、cell patterning、human retinal pigment epithelium cells、PC12 cells | 碩士 | 105 | 2018-11-11 | 2.28 年 |
| 107 | The Development of Electromagnetic Micro-actuator for SiOB Fabrication 電子研究所 矽光學平台、電磁微致動器、光學校準、SiOB、Electromagnetic Micro-actuator、Optical calibration | 碩士 | 104 | 2018-08-01 | 3.00 年 |
| 107 | The Development of Through Silicon Via with Inkjet Printing Process for Silver Interconnection Fabrication 電子研究所 噴墨式印刷、銀、矽穿孔、inkjet printing、Ag、through silicon via | 碩士 | 104 | 2018-08-01 | 3.00 年 |
| 107 | Design and Fabrication of the Embedded RJ45 Transformer in Printed Circuit Board 電子研究所 RJ45 變壓器、RJ45 transformer | 碩士 | 104 | 2018-08-01 | 3.00 年 |
| 106 | The Development of pH and Temperature Sensing Probe for Lower Limb Muscle Monitoring and Corresponding Animal Experiments 電子研究所 酸鹼感測探針、溫度感測探針、微型化感測探針、pH sensor、Temperature sensor、Micro sensing probe | 碩士 | 105 | 2018-07-22 | 1.97 年 |
| 106 | A Micromaching Sub-THz Reflector Antenna for Gain Enhancement and Near Field Focus Application 電子研究所 微機電、MEMS | 碩士 | 104 | 2018-06-07 | 2.85 年 |
| 106 | Ink-jet Printing of Flexible Micro Sodium Sensor Arrays 電子研究所 噴墨列印、感測器、鈉離子、ink-jet printing、sensors、sodium | 碩士 | 104 | 2017-09-05 | 2.10 年 |
| 105 | Analysis and Simulation for Internal Optics Field and External Output in Semiconductor Laser 工學院半導體材料與製程設備學程・共同指導:吳樸偉 橫截面、縱斷面、多區段半導體雷射、非穩定、週期性光信號輸出、cross-section、longitudinal section、unstability、multi-section semiconductor laser、periodic optical output | 碩士在職專班 | 100 | 2017-03-02 | 5.59 年 |
| 105 | The Study of Flexible Disc-like Patch Antenna Array 電子研究所 軟性基板、微帶天線、太赫茲波、flexible substrate、patch antenna、THz | 碩士 | 103 | 2016-12-26 | 2.40 年 |
| 105 | A Inkjet Printed Piezoresistive Graphene Tactile Sensor For Endosurgical Palpation Applications 電子研究所 石墨烯、觸覺感測器、壓阻、graphene、tactile sensor、piezoresistive | 碩士 | 103 | 2016-10-27 | 2.24 年 |
| 105 | Fabrication of AAO-Fe3O4 Nanocomposite Membrane for Performance Enhancement of RF On-Chip Spiral Inductors 電子研究所 陽極氧化鋁、陽極氧化鋁/四氧化三鐵奈米複合薄膜、高頻螺旋型電感、感值、品質因子、Anodic alumina oxide (AAO)、AAO-Fe3O4 Nanocomposite thin film、On-Chip Spiral Inductors、Inductance (L)、Quality factor (Q) | 碩士 | 103 | 2016-10-27 | 2.24 年 |
| 105 | A Low Temperature Inkjet Printing and Filling Process for Low Resistive Ag TSV Fabrication in A SU-8 Substrate 工學院加速器光源科技與應用學位學程・共同指導:宋艷芳 噴墨列印、穿孔、Inkjet printing、via | 碩士 | 103 | 2016-10-27 | 2.24 年 |
| 104 | A Lift-off Printing (LoP) Process for Fabrication of Scalable Inkjet Printed Microstructures 軟性電子、噴墨印製、電感、噴印微系統、flexible electronics、inkjet printing、inductor、printed microsystems | 碩士 | 100 | 2016-08-22 | 5.06 年 |
| 104 | High Frequency Characterization of Kapton Substrate for High Frequency Flexible Wireless Microsystem Application 電子工程學系 電子研究所・共同指導:郭建男 軟性電子、微帶線、覆晶接合、Flexible Electronics、Flip Chip、Kapton Substrate | 碩士 | 101 | 2016-08-04 | 4.01 年 |
| 104 | Design and Fabrication of an Inkjet Printed Flexible Tungsten Oxide-Based pH Sensor Array for 2D pH Monitoring of Chronic Wound 生醫工程研究所 可撓式酸鹼計、氧化鎢、噴墨式印表機、flexible pH sensor、WO3、inkjet printing | 碩士 | 103 | 2016-05-31 | 1.83 年 |
| 104 | Characteristic Improvement of Inkjet Printed Ag Interconnects Using Tape On-Off and Mirror-Reaction Processes 工學院加速器光源科技與應用學位學程・共同指導:許博淵 噴墨印刷銀、Inkjet Print Silver | 碩士 | 102 | 2015-10-22 | 2.22 年 |
| 104 | Process Improvement of Hexagonal - Type pH and Temperature Sensing Probe and Three Dimensional Heart Muscle pH Monitoring with Temperature Compensation 電子工程學系 電子研究所 六角柱、酸鹼感測、溫度感測、探針、Hexagonal、pH Sensing Probe、Temperature Sensing Probe、Temperature Compensation | 碩士 | 102 | 2015-08-23 | 2.06 年 |
| 103 | Process Design and Development of the Low-Power Microspeaker Using Graphene as the Speaker Membrane 電機資訊國際學程 以石墨烯為震膜之低功耗微型喇叭製程設計與開發 | 碩士 | 101 | 2014-09-10 | 2.11 年 |
| 102 | The investigation of a magnetic stimulation tag for neurophysiological monitoring 電子工程學系 電子研究所 磁刺激、微型線圈、噴印技術、magnetic stimulation、micro-coil、inkjet printing | 碩士 | 101 | 2014-06-11 | 1.86 年 |
| 102 | Material Synthesis and Property improvement of CoNiMnP-AAO Nanocomposite Using Pulse Electroplating Technique 電子工程學系 電子研究所 鈷鎳錳磷、磁性材料、陽極氧化鋁、脈衝電鍍、CoNiMnP、Magnetic Material、AAO、Pulse Elctroplating | 碩士 | 100 | 2014-06-11 | 2.86 年 |
| 102 | The self-calibration scheme of a flexible current sensor tag in household appliance 電子工程學系 電子研究所 電流感測器、家用電線、自我校正、可撓、current sensor、household appliance、self-calibration、flexible | 碩士 | 101 | 2014-02-12 | 1.53 年 |
| 102 | Hexagonal - Type pH and Temperature Sensing Probe with RTD CMOS Circuit for Heart Muscle Monitoring 電子工程學系 電子研究所 溫度感測、酸鹼感測、微型探針、Temperature Sensor、pH Sensor、Micro Probe | 碩士 | 100 | — | 無法計算 |
| 101 | Topography Study of Inkjet-printed Barium Titanate Nanoparticles and its Application in Composite Dielectric Flexible Capacitors 材料科學與工程學系所・共同指導:吳樸偉 噴墨、複合介電層、軟性電子、電容、Ink-Jet Printing、Composite Dielectric、Flexible Electronics、Capacitor | 碩士 | 100 | 2013-08-23 | 2.06 年 |
| 101 | Design and Fabrication of Microspiral Inductive Coils for the Applications in Cell Culturing, Low Power Electromagnetic Actuation and Electricity Monitoring of Household Appliances 電子工程學系 電子研究所 感應線圈、電磁致動、微型揚聲器、電力感測、微機電、Inductive Coil、Electromagnetic Actuation、Microspeaker、Electricity Monitoring、MEMS | 博士 | 97 | 2013-07-17 | 4.96 年 |
| 101 | Study on the Two-Dimensionally Grain-Boundary-Controlled Polycrystalline Silicon Thin-Film and Nanowire Transistors for Nonvolatile Memory Applications 電子工程學系 電子研究所・共同指導:鄭晃忠 多晶矽、非揮發性記憶體、奈米線電晶體、準分子雷射、Polycrystalline Silicon、Nonvolatile Memory、Nanowire Transistors、Excimer laser | 博士 | 97 | 2013-01-07 | 4.44 年 |
| 101 | A Flexible, Non-Intrusive Power Sensor Tag Integrated with NiFe C-Clamp Stripes for Electricity Monitoring of Two-Wire Household Appliances 電子工程學系 電子研究所 需求響應、軟性電力感測器、微機電系統、磁芯、抗干擾、Demand Response、Flexible Power Sensor、MEMS、Magnetic Core、Self-calibration | 碩士 | 99 | 2012-08-01 | 2.00 年 |
| 101 | Fabrication of THz Passives on a Silicon Carrier for THz SoP (System on package) Application 電子工程學系 電子研究所 兆赫波、寬頻連接器、號角天線、覆晶接合、THz、Boadband interconnect、Horn antenna、Flip Chip Bonding | 碩士 | 99 | — | 無法計算 |
| 101 | Design and Fabrication of a Multipoint pH and Temperature Recording Probe for Real-Time Heart Muscle Monitoring 電子工程學系 電子研究所・共同指導:郭建男 酸鹼度、溫度、探針、心肌、pH value、temperature、probe、muscle | 碩士 | 99 | — | 無法計算 |
| 100 | Electroplated Ni-Diamond and Ni-CNT Nanocomposites for Micromechanical Resonator Applications 機械工程系所・共同指導:徐文祥 電鍍、鎳、鎳-鑽石、鎳-奈米碳管、奈米複合材料、微機械式共振器、Electroplated、Ni、Ni-diamond、Ni-CNT、Nanocomposite、Micromechanical resonator | 博士 | 94 | 2012-07-11 | 6.94 年 |
| 100 | Crack Formation after Thermal Cycling Tests for Sn2.3Ag Microbumps with Different Under-Bump-Metallization Structures 三維積體電路、微凸塊、熱循環測試、介金屬化合物、3D IC、Microbump、Thermal Cycling、IMC | 碩士 | 99 | 2012-07-09 | 1.94 年 |
| 100 | Development of Heterogeneous Integration Technology for RF System-on-Package Applications 電子工程學系 電子研究所 射頻系統封裝、異質整合、微機電、螺旋式電感、軟性電子、RF System-on-Package、Heterogeneous Integration、MEMS、Spiral Inductor、Flexible Electronics | 博士 | 92 | 2012-02-17 | 8.55 年 |
| 100 | CoNiMnP-AAO Hard Magnetic Nanocomposite Film for MEMS Applications 電子工程學系 電子研究所 永久磁鐵、氧化鋁、鈷鎳錳磷、permanent magnet、Anodized aluminum oxide、CoNiMnP | 碩士 | 98 | 2011-12-23 | 2.39 年 |
| 100 | Fabrication and Characterization of the Micromachined Inductor with NiFe-AAO Nanocomposite Core 電子工程學系 電子研究所 陽極氧化鋁、鎳鐵、螺旋電感、懸浮微機電式結構、Anodic Alumina Oxide(AAO)、NiFe、Spiral Inductors、Suspended MEMS Structure | 碩士 | 97 | 2011-12-02 | 3.33 年 |
| 100 | Study on the CNT-first-approach Technology of Carbon Nanotube-based Through Silicon Vias with Co-deposited Catalytic Metals for Three Dimensional Integrated Circuits 電子工程學系 電子研究所・共同指導:鄭晃忠 奈米碳管、矽晶直通孔、三維積體電路、Carbon nanotubes (CNTs)、Through silicon vias (TSVs)、Three dimensional integrated circuits(3D-ICs) | 碩士 | 98 | 2011-08-25 | 2.06 年 |
| 100 | A Flexible Inductive Coil Tag for Household Two-Wire Current Sensing Applications 電子工程學系 電子研究所 電流感測器、微機電、需求響應、軟性基板技術、Current sensor、Inductors coil、MEMS、Demand Response、Flexible Technology、magnetic material | 碩士 | 98 | 2011-08-23 | 2.06 年 |